We provide a service offering the supply and installation of the following types of ceiling:
- :Bulkhead, downstand in all shapes
- :Grid Systems
The MF ceiling system can accept some degree of loading and is the more traditional form of application. The system can utilise on or more layers of a wide range offboards, Wallboard, Moistureshield, Soundshield, Vapourshield, Fireshield,Fire Moistureshield and Dens.
The boards are fixed onto a lightweight metal framework of MF ceiling channels and MF perimeter channels.
The lightweight galvanised grid is suspended by either strap hangers or angle sections fixed to the structural soffit with soffit cleats.
The tapered edge boards can be taped and jointed using Jointing Compounds and Accessories. Alternatively, a 2 to 5mm skim coat with board finish can be applied to achieve a more traditional plaster finish.
Suspended ceilings are hung from the ceiling joists with a metal grid. This creates the cavity between the joists and the ceiling where pipes, wires, and ductwork can be installed and worked on. A tile ceiling is either glued directly to an existing ceiling or onto "furring strips" that are glued or nailed to the existing ceiling. This type of ceiling works well either in covering over an older existing ceiling or where height is a consideration and a suspended ceiling would drop too low.
Bulkheads are shaped protruding layers of plasterboard / plaster that can really make a feature out of any room. We can create the bulkhead in any shape that you like - and if you are not sure, we will offer you advice on what would be the most practical, stylish ceiling design.